How to Install Driver Jp1082 No 030818 for USB LAN Converter on Windows 7
How to Install Driver Jp1082 No 030818 for USB LAN Converter on Windows 7
If you have a USB LAN converter model JP1082 030818 and you want to use it on Windows 7, you might encounter some problems finding and installing the right driver. This is because the CD that comes with the device does not contain drivers for Windows 7 64-bit, and the manufacturer does not provide any official support for this operating system. However, there is a way to make it work by using a compatible driver from another source. In this article, we will show you how to download and install Driver Jp1082 No 030818 for USB LAN converter on Windows 7.
Driver Jp1082 No 030818
Step 1: Download the Driver
The first step is to download the driver that works with the USB LAN converter model JP1082 030818. You can find it on this link: https://mega.nz/#!JBZiGBTA!MqAdpqIe3s.... This is a zip file that contains the driver files for Windows XP, Vista, and 7. You will need to extract the zip file to a folder on your computer.
Step 2: Install the Driver
The next step is to install the driver on your Windows 7 computer. To do this, follow these steps:
Plug in your USB LAN converter to a USB port on your computer.
Open Device Manager by clicking Start, typing device manager, and pressing Enter.
Find the device that has a yellow exclamation mark next to it and is labeled as Unknown Device or Ethernet Controller. Right-click on it and select Update Driver Software.
Select Browse my computer for driver software.
Select Let me pick from a list of device drivers on my computer.
Select Network adapters and click Next.
Click Have Disk and browse to the folder where you extracted the driver files.
Select the file named netmosuio.inf and click Open.
Click OK and then Next.
Wait for the installation to complete and click Close.
Step 3: Test the Connection
The final step is to test if your USB LAN converter is working properly. To do this, follow these steps:
Open Network and Sharing Center by clicking Start, typing network and sharing center, and pressing Enter.
Click Change adapter settings on the left pane.
Find the network adapter that corresponds to your USB LAN converter. It should be labeled as USB 2.0 10/100M Ethernet Adaptor or something similar. Right-click on it and select Properties.
Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
Make sure that Obtain an IP address automatically and Obtain DNS server address automatically are selected. Click OK.
Click OK again to close the network adapter properties.
Open a web browser and try to access any website. If you can browse the internet, then your USB LAN converter is working correctly.
Congratulations! You have successfully installed Driver Jp1082 No 030818 for USB LAN converter on Windows 7. You can now enjoy fast and reliable internet connection with your device. If you have any questions or problems, feel free to leave a comment below or contact us at support@bing.com. We are here to help! 0efd9a6b88
https://www.freedomkettlecorn.com/group/freedom-team/discussion/25c5d748-5fb8-49a2-99a6-79ff0240ec6e